High Quality DN400 Ppn16 Rubber Encapsulated Wedge Gate Valve

• Customization: Available
• Type: Direct-acting
• Material: Ductile Iron
• Model NO.: G-001
• Pressure: Low Pressure
• Actuator: Manual
• Seal Surface: Parallel Gate Valve
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Flow Control
• Standard: DIN
• Application: Industrial Usage, Water Industrial Usage
• Size: Dn50-Dn2000
• Transport Package: Plywood Case
• Specification: CE
• Trademark: TFW
• Origin: Tianjin China
• HS Code: 84818040
• Production Capacity: 5000PCS/Month

Product Description

DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.

1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
 

NO.	PART	MATERIAL
1	Body	Ductile Iron
2	Seat	EPDM
3	Shaft	Stainless steel 420
4	Disc	Ductile Iron
5	Wedge Nut	Brass
6	Bonnet	Ductile Iron
7	O ring	EPDM
8	Thrust ring	Brass
9	sealing ring	EPDM
10	socket head screw	Carbon Steel
11	O ring	EPDM
12	Hand wheel	Ductile Iron
13	Stem Nut	Brass

FAQ
1. Q: Are you a manufacturer or trading company ?
A: we are valve manufacturer and factory ,and not trading company.
2. Q: Do you have agent or representative abroad?
A: We do not have agent abroad,please contact us to purchase valves
from TIANJIN TANGFA WATTS VALVE CO., LTD.. directly.
3. Q: What's your product range?
A: We can produce Butterfly valve,Gate valve,Check valve,Y strainer,Rubber Joint
by ISO/ANSI/DIN/JIS/ EN/GOST/AS standard.
4. Q: Is there any stock in your factory? and how about your lead time?
A: We stock valves with normal sizes. The lead time depends on your quantity,
generally 30-35 days.
5. Q: Which countries do you export to ?
A: We export directly to vast majority of countries in the world.
6. Q: What certificates will you provide ?
A: We can provide CE/ ISO / WRAS.
7. Q:After-sales service
A:18 months year warranty for all kinds of products.
As an experienced manufacturer, you can rest assured of the quality and sales service.
8.Q: Payment
A:T/T, L/C, OA, D/P, D/A.
9.Q:Transportation
A:Transported by DHL, UPS, EMS, FEDEX, SF, by Air, by Sea.
10. Q:Do you provide free sample?
A:Free sample is OK for us.
11. Q:Do you accept custom design on size?
A:Yes, if the size is reasonable.